PRODUCT FINDER

XSMD WITH XSGLOBE

Single anchor points, like the XSGlobe, are permanent anchors installed on the surface of a structure and are suitable for one user at a time. The user is secured directly to the 360^o rotating safety eye of the anchor point itself. If more freedom of movement is needed, a temporary lifeline can be placed between two anchor points.

XSGlobe anchor points are installed to steel trapezoidal cold roof plates, with a minimum thickness of 0,63 mm (24 gauge), by means of the aluminum XSMD base plate. In this case installation occurs with twelve Gesipa 7,7 mm (5/16”) bulb-tite rivets.

All XSPlatforms single anchor point systems are designed, tested and certified in accordance to the latest European standards EN 795:2012 type A.

SPECIFICATIONS

• Steel trapezoidal cold roof plates
• Thickness of 0,63 mm (24 gauge)
• Installation with Gesipa 7.7 mm (5/16”) bulb-tite rivets
• Max. roof pitch of 15 degrees
• Anchorage eye with 360 degree rotation
• Suitable for 1 user
• Suitable for both fall arrest and fall restraint
• Durable stainless steel components
• EN 795:2012 type A

DOWNLOADS

XTRUSION WITH RAP GLOBE

Single anchor points, like the RAP Globe, are permanent anchors installed on the surface of a structure and are suitable for one user at a time. The user is secured directly to the 360^o rotating safety eye of the anchor point itself.

RAP Globe anchor points are installed to aluminum roof panels with circular interlock geometry (round seam), with a minimum thickness of 0,9 mm (21 gauge) by means of the AISI 316 XTrusion base plate. In this case installation occurs with four aluminum round seam clamps per base plate. The use of this clamping method to install anchor points minimizes the chance of damages, due to penetration/drilling, and the chance of leakages.

All XSPlatforms single anchor point systems are designed, tested and certified in accordance to the latest European standards EN 795:2012 type A.

SPECIFICATIONS

• Steel trapezoidal cold roof plates
• Thickness of 0,63 mm (24 gauge)
• Installation with Gesipa 7.7 mm (5/16”) bulb-tite rivets
• Max. roof pitch of 15 degrees
• Anchorage eye with 360 degree rotation
• Suitable for 1 user
• Suitable for both fall arrest and fall restraint
• Durable stainless steel components
• EN 795:2012 type A

DOWNLOADS

XSMD WITH RAP GLOBE

Single anchor points, like the RAP Globe, are permanent anchors installed on the surface of a structure and are suitable for one user at a time. The user is secured directly to the 360^o rotating safety eye of the anchor point itself.

RAP Globe anchor points are installed to steel trapezoidal cold roof plates, with a minimum thickness of 0,63 mm (24 gauge), by means of the aluminum XSMD base plate. In this case installation occurs with twelve Gesipa 7,7 mm (5/16”) bulb-tite rivets.

All XSPlatforms single anchor point systems are designed, tested and certified in accordance to the latest European standards EN 795:2012 type A.

SPECIFICATIONS

• Steel trapezoidal cold roof plates
• Thickness of 0,63 mm (24 gauge)
• Installation with Gesipa 7.7 mm (5/16”) bulb-tite rivets
• Max. roof pitch of 15 degrees
• Anchorage eye with 360 degree rotation
• Suitable for 1 user
• Suitable for both fall arrest and fall restraint
• Durable stainless steel components
• EN 795:2012 type A

DOWNLOADS