ODIN LIFELINE CALCULATION TOOL

Easy calculation and reporting – Save time and money

LIFELINE CALCULATION MADE EASY


The ODIN calculation tool helps to save time on calculations, automatically generate detailed reports and prevent expensive miscalculation.

ODIN is used for roof, wall and overhead calculations. These calculations are based on year-long in house testing of our XSPlatforms products. Check out the video and find out why you should work with ODIN.

RELIABLE REPORTING


Many of our customers worldwide see ODIN as one of the best and most reliable tools for lifeline calculation. Using ODIN you can setup lifeline compliance systems for the following standards:

  • EN795:2012 & CEN/TS16415 (Europe)
  • ANSI Z359.6:2009 (United States)
  • CSA Z259.16-04:2009 (Canada)

When the calculation is complete, ODIN provides a calculation report with system certificate that confirms compliance with the selected norm.

LIFELINE CALCULATION WITHOUT ODIN


After roof inspection and measuring roof dimensions onsite, open a drawing tool.

  1. Sketch a roof or use an existing roof plan (if available).
  2. Check information regarding roofing material and roof construction.
  3. Choose a right lifeline solution and position of it on the roof.
  4. Contact a manufacturer and request to calculate the lifeline system and deliver a report with required information like:
    • span length,
    • anchor loads,
    • lifeline deflection,
    • minimal required clearance for a safe fall.
  5. Draw anchor points and lifelines.
  6. Indicate all supports of the lifeline on the roof plan.
  7. Open Word to create a report.
  8. Write down the different values mentioned above.
  9. Check if system is compliant to the needed standard.
  10. Copy the drawings to the Word document.
  11. Create a detailed report of the solution and test report.
  12. Recheck document for any miscalculations.

Average time required: 2+ hours

LIFELINE CALCULATION WITH ODIN


After roof inspection and measuring roof dimensions onsite, start the ODIN lifeline calculation tool.

  1. Sketch a roof or use an existing roof plan (if available).
  2. Check information regarding roofing material and roof construction.
  3. Choose a right lifeline solution and position of it on the roof.
  4. Open ODIN and enter all relevant information as:
    • norm to comply with
    • roofing/wall material
    • selected product and number of users
  5. ODIN calculates and approves if the system meets the selected standard and automatically provides a custom report for your customer.
  6. Indicate all supports of the lifeline on the roof plan.

Average time required: 15-30 minutes (depending on the complexity of the lifeline system)

ABOUT ODIN

Read more about ODIN, check out latest blogs and FAQ

FAQ ABOUT ODIN


KEY ADVANTAGES OF ODIN FOR RESELLERS AND END USERS

CONTACT US

We’ll get back to you within 1 working day

Menu